Corstone SSE-315 with Ethos-U65 Example Subsystem for Ecosystem FVP

Introduction

Corstone-315 is an Arm reference subsystem for secure System on Chips containing an Armv8.1-M Cortex-M85 processor and LCM, KMU and SAM IPs. and an Ethos-U65 neural network processor. It is an MPS4 based platform.

This platform port supports all TF-M regression tests (Secure and Non-secure) with Isolation Level 1 and 2.

Note

For Ethos-U65 IP this platform support only provides base address, interrupt number and an example NPU setup as non-secure, unprivileged.

Note

For Armclang compiler v6.18 or later version is required.

Building TF-M

Follow the instructions in Building instructions.

Build instructions with platform name: arm/mps4/corstone315

-DTFM_PLATFORM=arm/mps4/corstone315

Note

The built binaries can be run on the Corstone-315 Ethos-U65 Ecosystem FVP (FVP_Corstone_SSE-315).

Note

If -DTFM_DUMMY_PROVISIONING=ON then the keys in the tf-M/platform/ext/target/arm/mps4/common/provisioning/bundle_cm/cm_provisioning_config.cmake, tf-M/platform/ext/target/arm/mps4/common/provisioning/bundle_dm/dm_provisioning_config.cmake and default MCUBoot signing and encryption keys will be used for provisioning.

If -DTFM_DUMMY_PROVISIONING=OFF is set then unique values can be used for provisioning. The keys and seeds can be changed by passing the new values to the build command, or by setting the -DDM_PROVISIONING_KEYS_CONFIG and -DCM_PROVISIONING_KEYS_CONFIG` flag to the .cmake files which contain the keys. An example config cmake file can be seen at ``tf-m/platform/ext/target/arm/mps4/common/provisioning/bundle_cm/cm_provisioning_config.cmake and tf-m/platform/ext/target/arm/mps4/common/provisioning/bundle_dm/dm_provisioning_config.cmake. Otherwise new random values are going to be generated and used (or default values in some cases). For the image signing the ${MCUBOOT_KEY_S} and ${MCUBOOT_KEY_NS} will be used. These variables should point to .pem files that contain the code signing private keys. The public keys are going to be generated from these private keys and will be used for provisioning. The hash of the public key is going to be written into the provisioning_data.c automatically. For the BL2 image encryption the TFM_BL2_ENCRYPTION_KEY_PATH has to be set to a .bin file which contains the encryption key. (For an example, see tf-m/bl1/bl1_2/bl2_dummy_encryption_key.bin)

If -DMCUBOOT_GENERATE_SIGNING_KEYPAIR=ON is set then a new MCUBoot signing public and private keypair is going to be generated and it’s going to be used to sign the S and NS binaries.

The new generated keypair can be found in the <build dir>/bin folder or in the <install directory>/image_signing/keys after installation. The generated provisioning_data.c file can be found at <build directory>/platform/target/provisioning/provisioning_data.c

Note

The provisioning bundle generation depends on pyelftools that’s have to be installed:

pip3 install pyelftools

To run the example code on Corstone-315 Ethos-U65 Ecosystem FVP

FVP is available to download here

  1. Install the FVP

  2. Copy bl1_1.bin, cm_provisioning_bundle.bin, dm_provisioning_bundle.bin, bl2_signed.bin and tfm_s_ns_signed.bin files from build dir to <FVP installation path>/models/Linux64_GCC-6.4/

  3. Navigate to the same directory and execute the following command to start FVP:

    $ ./FVP_Corstone_SSE-315 --data "bl1_1.bin"@0x11000000
                   --data "cm_provisioning_bundle.bin"@0x12024000
                   --data "dm_provisioning_bundle.bin"@0x1202aa00
                   --data "bl2_signed.bin"@0x12031400
                   --data "tfm_s_ns_signed.bin"@0x38000000
    
  4. After completing the procedure you should be able to see similar messages to this on the serial port (baud 115200 8n1):

    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    [INF] Starting TF-M BL1_1
    [INF] Beginning provisioning
    [INF] TP mode set complete, system will now reset.
    [INF] Starting TF-M BL1_1
    [INF] Beginning provisioning
    [INF] Waiting for CM provisioning bundle
    [INF] Enabling secure provisioning mode, system will now reset.
    [INF] Starting TF-M BL1_1
    [INF] Beginning provisioning
    [INF] Waiting for CM provisioning bundle
    [INF] Running CM provisioning bundle
    [INF] Starting TF-M BL1_1
    [INF] Beginning provisioning
    [INF] Waiting for DM provisioning bundle
    [INF] Enabling secure provisioning mode, system will now reset.
    [INF] Starting TF-M BL1_1
    [INF] Beginning provisioning
    [INF] Waiting for DM provisioning bundle
    [INF] Running DM provisioning bundle
    [INF] Starting TF-M BL1_1
    [INF] Jumping to BL1_2
    [INF] starting TF-M bl1_2
    [INF] Attempting to boot image 0
    [INF] BL2 image decrypted successfully
    [INF] BL2 image validated successfully
    [INF] Jumping to BL2
    [INF] Starting bootloader
    [INF] Image index: 1, Swap type: none
    [INF] Image index: 0, Swap type: none
    [INF] Bootloader chainload address offset: 0x0
    [INF] Jumping to the first image slot
    Booting TF-M v2.0.0+d09934721
    Non-Secure system starting...
    

Note

Some of the messages above are only visible when CMAKE_BUILD_TYPE is set to Debug.


Copyright (c) 2024, Arm Limited. All rights reserved.